Restoring Mix 3 Partition, Trying to Install Windows 11 Before, Ended in a Mess

Hi
Anyone know how to restore Mix 3 partition?
I followed https://renegade-project.org/#/en/windows/Installation-guide guide to install Window 11 ARM

cp /sdcard/parted /sbin/ && chmod 755 /sbin/parted umount /data && umount /sdcard parted /dev/block/sda rm 17 # remove userdata
mkpart esp fat32 6559MB 7000MB # 441 MB

after removing user data and make esp partition, the console showed some error and I decided to reboot the devices

In the end I can’t boot to TWRP anymore and stuck in fastboot

Tried to
Flash TWRP, no partition recovery error
Boot TWRP directly, only ends up in fastboot mode
MiFlash, error misc no such partition

Any help?


你好
有人知道如何恢复 Mix 3 分区吗?
我按照 Renegade Project 指南安装 Window 11 ARM

cp /sdcard/parted /sbin/ && chmod 755 /sbin/parted umount /data && umount /sdcard parted /dev/block/sda rm 17 # remove userdata
mkpart esp fat32 6559MB 7000MB # 441 MB

删除用户数据并制作 esp 分区后,控制台显示一些错误,我决定重新启动设备
最后我不能再启动到 TWRP 并卡在 fastboot

试图
刷机TWRP,没有分区恢复错误
直接启动 TWRP,只在 fastboot 模式下结束
MiFlash,错误杂项没有这样的分区

有什么帮助吗?

I think you are following the installation guide for Oneplus6(t), which has some differences on partitions. I suggest you unbricking the devices using EDL mode. Then reflash TWRP and retry. You’d better understand every steps before continuing. For instance, userdata partition can have a different number and you must be aware of that!

Yeah, I just realize my mistake
Btw will UBL help?
Since it’s UBL and so far there is no way to enter EDL mode even by shorting the connector for Mix 3, as far I know

I don’t know much about Mi Mix3 actually. :sweat_smile:

i have destroyed my Mix 3 5G too when i follow the Guide for OnePlus long time ago.
You can’t boot in EDL Mode because when you format the partitions you erased the information who the phone needed to go into EDL Mode.

Thats why my Mix 3 gets replaced with the Mix 4.
When i can fix my Mix 3 5G, please help me. :slight_smile:

I think you can only let the UFS-Memory flash to stock partitions

I tried to boot into EDL and it succeed to boot into EDL with shorting pin method
But to flash it with ROM, it’s not working at all, always show error

I think you can only let the UFS-Memory flash to stock partitions
I think it’s the only solution